The Deep Blue Metallic Unplugged Performance Model 3 is equipped with a set of lightweight ADV5.0 FLOWSpec flow formed wheels, sized 19×9 in the front and 19×10 in the rear, finished in a beautiful Bespoke Polished Gloss Man Bronze finish
Tesla is currently building three distinct versions of the Model 3: the Tesla Model 3 Standard Range Plus, Performance, and Long Range versions. The Performance is the most powerful and luxurious, the Long Range offers, well, longer range, and the Standard Range Plus is the most affordable version, and unlike its AWD (All Wheel Drive) siblings, it comes with RWD (Rear Wheel Drive) and a battery with slightly less capacity. These are the three current versions offered by the electric carmaker. However, for a short period of time (between October 2018 and March 2019) Tesla built a Mid Range version of their entry-level electric vehicle. This was a move executed by the carmaker in order to provide a solution for owners that wanted a bit more range than the Standard Range versions but didn’t want to go full-blown on a Performance or Long Range cars.
The vehicle came with a 52kWh battery, allowing an EPA range of 264 miles (425 km) combined and costing about $40,000 when it was released.
Just like the newer, Standard Range Plus models, it also came with an RWD (Rear Wheel Drive) setup and could do a sprint from 0-60mph (0-97km/h) in 5.2 seconds, as advertised. However, with several over-the-air updates, some owners are reporting that to be shaven down to about 4.8 – 4.9 seconds. Not a bad result for a car with a single motor powering its axle.
This Deep Blue Metallic Tesla Model 3 Mid Range comes from Unplugged Performance. The Hawthorne, California based tuner specializes in high-performance parts and upgrades for Tesla vehicles. Furthermore, a few weeks back, one of their Model 3 Performance cars even ran the Pikes Peak Race, one of the most challenging automotive races out there. Simply put, these people know Teslas. And by going with a set of ADV5.0FLOWSpec wheels for one of their builds just gives you show what the industry feels about our recently revealed FLOWSpec line.
For this Deep Blue Metallic Model 3, the tuner went with a set of ADV5.0 FLOWSpec wheels that are sized 19×9 in the front and 19×10 in the rear, our standard fitment for this vehicle. Furthermore, they chose to go with a Bespoke Polished Gloss Man Bronze finish for them, giving the wheels a beautiful finish. In addition to the wheels, the vehicle received a set of Unplugged Performance lowering springs. In turn, this Model 3 looks both aggressive and drop-dead gorgeous at the same time.
You can grab a detailed look at this Deep Blue Metallic Unplugged Performance Model 3 With ADV5.0 FLOWSpec wheels right below. The wheels are available for ordering through our online store right away. However, if you’re unsure of the fitment and sizing requirements for your vehicle, please contact us prior to ordering. Our sales team will ensure you pick the utmost perfect fitment for your vehicle.